Getting plastered on the construction site: M280
A modular design, the M280 presents workmanship that is both lightweight and ideal for construction site conditions. In particular, its ease of use and m-tec reliability make the M280 the mixing pump for all applications. For instance, the M280 can process all interior and exterior machine plasters with utmost ease.
Presenting an uncluttered array of controls free of superfluous switches, the M280 is a very practical mixing pump that enables the user a very easy operation.
The wheels, suitable for the construction site, make for easy transportation at all times. In addition, the M280 can also be hoisted by crane to the construction site. If there is no crane available, the M280 can be dismantled into its constituent components in just a few steps.
Besides bagged materials, the M280 can also be charged from a silo (in conjunction with an m-tec silo, conveying system and filter hood).
M280 - added benefits
Easy Clean
A cleaning slide reliably separates the wet and dry sections. With the mixing chamber swivelled off, the system can continue running in “two-hand jog mode” until the hopper is empty.
The result is a quick, efficient and residue-free cleaning of the machine’s mixing and pumping sections.
Easy Work
The M280 presents an uncluttered array of controls for very easy operation.
Easy Use
This makes easy work when machine products are processed.
Easy Handle
The duo-mix has the same connections as the M280, so it can be fitted as an accessory to its filter and feeding hoods.
M280 - facts
Areas of application and use
All pumpable dry mortar such as:
- Gypsum plaster
- Lime gypsum plaster
- Cement plaster
- Lime-cement plaster
- Masonry mortar
- Insulating plaster/render
- Finishing plaster
- Reinforcing and adhesive mortar
- Adhesive
- Levelling compounds
Technical information
| Delivery volume: | approx. 22 l/min (max. 50 l/min dependent on worm pump) | |
| Conveying distance:* | up to 40 m | |
| Conveying height:* | up to 20 m | |
| Conveying pressure:* | up to 30 bar | |
| Drive motors conveying area: | 1.1 kW, 400 V, 50 Hz, 51 Upm | |
| Mixing/pump section: | 5.5 kW, 400 V, 50 Hz, 400 Upm | |
| Air compressor: | 0.9 kW, approx. 250 l/min, 4 bar | |
| Electrical connection: | 400 V, 50 Hz | |
| Fuse: | 25 A | |
| Connector: | 32 A, 5P, 6 h | |
| Connecting cable: | 5 x 4.0 mm² | |
| Water supply: | 3/4" water hose with GEKA coupling, required water pressure/min. 2.5 bar | |
| Dimensions: | approx. 1545 x 636 x 1480 mm | |
| Filling height for bagged materials: | 1100 mm | |
| Weight: | 210 kg (excl. accessories + compressor) | |
*Dependent on consistency, quality and composition of the material, pump model and condition, diameter and length of the delivery hose as well as the pumping height of the material.